Chapter 3 Setup
7.8
Update
7.8.1 BMC Firmware
Use this page to update BMC firmware. Administrator privilege is required to update the firmware.
Tips
Tips
MGB*1
#1
#2
*1:
Indicates BMC number.
*2:
Flash ROM area of each BMC is divided into two banks. This indicates the bank number.
*3:
Indicates BMC version installed in each bank of BMC.
*4:
Indicates whether the bank is running with a checkmark [].
*5:
Indicates the bank to be booted at next bootup with a checkmark [].
•
With A2040b/A02010b/A2020b model, BMCs are duplicated. Thus, up to two BMC
revisions are displayed on this page.
•
With any other model, only one BMC revision is displayed.
•
The file extention of binary module for firmware update is [.ima].
•
The downloaded system BMC firmware update module (Windows/Linux) is zip format
file. Unzip the file, and open the Readme file to check if its firmware version is
appropriate to that of BMC of the server. Update image file of BMC has a file extension
[.ima].
BMC Firmware
Flash ROM*2
#1
#2
#1
#2
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Booting
Revision *3
*4
0C.22
38.4E
0C.22
38.4E
7. Using Remote Management
Next boot *5
379