Figure 9-46 Hardware Update Welcome Screen - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
2. Connect the NEC telephone system to the remaining port on the call
logging unit. You are now ready to record.
For Windows 7 or XP
1. Using the USB cable provided, connect the USB interface on the NEC
1-Port Digital Logging Unit to your PC. Windows automatically detects
the new hardware and starts the New Hardware Wizard. This displays
a dialog box similar to the one shown below. Select the second option,
Install from a list or specific location, and press Next>.
When using Windows 7 the device driver software is
installed automatically.
NOTE

Figure 9-46 Hardware Update Welcome Screen

2. Insert the NEC Installation CD in your CD drive and press Next>.
If you downloaded the files from the Internet or FT server,
uncheck the Search removable media box, select the
Include this location... box and enter the location where
NOTE
you stored the downloaded files (e.g. C:\My Documents).
Press Next> (refer to
– Logo Testing
Figure 9-48 Hardware Installation
Screen).
9-63