Issue 3.0
SV9100 System Hardware Manual
5.1.2
Multiple CHS2UG-US Chassis Installation
Expansion chassis can be secured to the CHS BASE UNIT and require an
additional CHS2UG JOINT BRACKET KIT per chassis.
1.
Install the five rubber feet to the bottom of each chassis.
Figure 3-87 Install Rubber Feet for Multiple Chassis
2.
Using supplied screws in the CHS2UG JOINT BRACKET KIT, attach
metal brackets to both ends of the 19" chassis and the CHS BASE
UNIT. Refer to
Figure 3-88 Install Metal Brackets with Screws
Figure 3-88 Install Metal Brackets with
Screws.
Metal
Brackets
3-71