Figure 3-150 Chsg Large Batt Box To Chs2Ug Gw-Us Or - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
S 9 P
ECTION OWER
WARNING
SV9100 System Hardware Manual
Figure 3-150
6. Reconnect AC power cable to rear of 9.5" chassis.
7. To power on the 9.5" chassis, refer to Chapter 4,
SV9100 System on page
8.4.3 CHSG LARGE BATT BOX Fuse Replacement
To replace the fuse(s) in the CHSG LARGE BATT BOX, refer to Chapter 3,
section 8.2.4 CHSG LARGE BATT BOX Fuse Replacement on page
S
UPPLY
Do not attempt to replace the power supply on the CHS2UG-US or CHS2UG
GW-US chassis. The MPS7101 is not a field replaceable part. If the power
supply fails, contact NEC.
CHSG LARGE BATT BOX to CHS2UG GW-US or
CHS2UG B-US Connection
4-9.
2.6 Powering Up the
3-101.
3-113