Figure 9-149 Example Of Port Names - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

13.7.1 Installation

The NEC IP6-L Adapter snaps into the back of the phone and converts IPv6

network traffic into IPv4 for communication with the telephone. The NEC

Concentrator handles the IPv4 to IPv6 communication, but also contains

SSL security certificates for the Concentrator and the telephone.

Do not deploy the Concentrator into the production environment until

the configuration has been completed.

Obtain IP address information from your ISP or resident network

administrator for the Concentrator's WAN port and at least one DNS

Server address.

For the Adapter, the "LAN" port means the port toward the DT700

phone and the "WAN" port means the port toward the PBX. For the

Concentrator, the "LAN port" means the port toward the PBX and the

"WAN" port means the port toward the DT700 Series phones.

Figure 9-149 Example of Port Names

Configuration is done through a web GUI. Launch a browser and

point it to the Concentrator's Port 1's default IP address, 192.168.1.1.

You may need to change the IP address of your PC to connect.

The default login credentials are user name root and password

For detailed configuration instructions including

the building and installation of custom security

certificates, refer to the Concentrator IP6-L

Installation Guide.

Table of Contents