Table 5-20 Ut880 Platform Information - NEC Univerge SV9100 System Hardware Manual

S 7 UT880 IP T
ECTION
The UT880 is an IP desk phone for use on the SV9100 system. This phone is
powered by Power over Ethernet (PoE) reducing the need for power adapters
allowing for a clean installation. In addition, headsets for those users who frequently
make long calls are supported for comfort.
7.1
7.2
7.3
Refer to Table 5-20 UT880 Platform Information for UT880 specifications.
Main Item
5-108
ELEPHONE
Powering the UT880
The UT880 can only be powered using Power over Ethernet (PoE) 802.3af.
Updating the UT880 System Firmware
UT880 firmware is updated via the Internet from the settings page of the phone.
To update the firmware go to the desk top of the UT800, choose Settings and
select About Tablet. Choose System updates then Check now. If an update is
available you will be prompted to download the update. Once the download has
finished you will be prompted to apply the update. If no update is available the
phone will state your system is up to date.
UT880 Platform Information

Table 5-20 UT880 Platform Information

Sub Item
CPU
Flash Memory
System
SDRAM Memory
CODEC
Handset
Voice
Headset
Interface
Speaker Phone
LAN
Network PC
Bluetooth
LCD
Display &
LED
Keypad
Keypad
Specification
ARM Cortex-A9 Dual MicroProcessor 512KB L2 Cache
4Gbit NAND Flash
1Gbit DDR3 SDRAM
G.711u/a, G.729, G.722, H.264
Supported
Supported
Supported
10/100/1000Bast-T with Auto MDIX
10/100/1000Bast-T with Auto MDIX
BT V2.1 + EDR
7" TFT LCD (1024x600)
Message indicator support (3EA)
Full Touch
Installing DT Series Digital and IP Multiline Terminals
Issue 3.0