Power Requirements; Power Supply Specifications - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
6.2
SV9100 System Hardware Manual
Table 2-19 Cabling Requirements
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling
IP Video Doorphone

Power Requirements

A dedicated 100VAC/ 120VAC/220VAC/230 – 240VAC
within seven feet of the chassis is required. A separate dedicated outlet for each
chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
NOTE
6.2.1

Power Supply Specifications

AC Power Supply:
Dedicated 15 Amp circuit

Power Requirements: 120VAC @ 15A Controlling/Base Chassis

Power Consumption: Base Chassis = 263VA,

Expansion Chassis = 263VA, total 1052VA
Input Voltage: 90VAC to 264VAC

(Rated Voltage: 100VAC/120VAC/220VAC – 240VAC)
Frequency: 47Hz – 63Hz (Rated frequency: 50/60Hz)

Phase and Wire: Single Phase, 2 Line + PE Type

Grounding Requirements: No. 14 AWG copper wire

Feeding Voltage: D

With input voltage of 120VAC and with full load conditions:
Output Power: Base chassis=130W, Expansion chassis=130W,

total 520W
AC Input I: Base chassis = 2.19A, Expansion chassis=2.19A, total

8.76A
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network Cable
– 328.1 ft (100m) maximum
distance
Maximum 100m (by LAN cable)
50Hz/60Hz circuit located
term
/OPX/DID: -48V
SLT: 25mA / -28V
Cable
2-29