Figure 9-13 Pgd(2)-U10 Adp Cable Connection - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Connect the two-conductor station cable from the CN5 connectors in the

PGD(2)-U10 ADP to the external relay/external page.

Figure 9-13 PGD(2)-U10 ADP Cable Connection

The PGD(2)-U10 ADP provides amplifiers for each page

output port (for a maximum of +8 dBM, 600 ohms at 1KHz).

No additional page amplification is provided by the

PGD(2)-U10 ADP but, if required, an external page amplifier

can be used for additional amplification.

The page output of the GCD-CP10 does not provide

amplification (for a maximum output of -3 dBm, 600 ohms at

1KHz). If the paging volume is not satisfactory using the CN8

or CN9 connector on the GCD-CP10, the PGD(2)-U10 ADP

should be used instead.

Table of Contents