Issue 3.0
2.2
Figure 4-4 Inserting Blades in the 19" Chassis
SV9100 System Hardware Manual
Installing an Extension or Trunk Blade
2.2.1
Installing the Blades
To install an extension/trunk blade with the system running:
1.
Insert the blade in the guide rail and push it securely into position.
Tighten the thumb screw on either side of the blade.
2.
The Status LED starts flashing when the blade starts processing (15
seconds).
Figure 4-5 Inserting Blades in the 9.5" Chassis
4-5