3.2
7-20
Table 7-8 Base Station LED States and Meanings (Continued)
Color
State
Red
Blinking
Red
Blinking
Red
Flickering
Red
Steady On
Base Station Wall Mounting Installation
Ensure the wall can support the weight of the base station.
IMPORTANT
1.
Hold the base in its final location and mark the screw location based on the
measurements shown.
Figure 7-19 Base Station Dimensions
Meaning
Factory reset warning. A factory reset has been
initiated or is in progress.
No Ethernet connection available
OR
handset registration failed.
Stage in base flash memory rewrite at the end of the
base firmware update.
Critical error. Contact technical support.
Installing SV9100 Wireless Telephones
Issue 3.0