S
5
F
ECTION
LOOR
5.1
3-68
M
C
OUNTING THE
Floor Mounting the 19" (CHS2UG-US) Chassis
The CHS2UG-US controlling and expansion chassis can be mounted on the floor
using the CHS BASE UNIT and the CHS2UG JOINT BRACKET KIT.
5.1.1
CHS2UG-US Chassis Installation
1.
Use the template shown in
for required spacing before drilling holes for 0.39" (10mm) anchor
bolts (locally procured).
Figure 3-83 Floor Mount Spacing Guide
2.
Mark and drill the four holes required to install the CHS BASE UNIT.
3.
Using anchor bolts, secure the CHS BASE UNIT to the floor. Refer to
Figure 3-84 Secure CHS BASE UNIT with Anchor Bolts
HASSIS
Figure 3-83 Floor Mount Spacing Guide
Issue 3.0
for screw
Installing the SV9100 Chassis