Figure 9-37 Recorder Screen - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
11.5.6.4 Install the 4-Port Digital Call Logging Unit BackOffice
Software
1. Insert the NEC BackOffice CD in the CD drive of the PC.
2. Locate the Recorder folder.
3. Click on the Setup.exe file in the Recorder folder.
4. Select Telephone System-Type.
CAUTION
5. Select Install Location or Next to choose default
(recommended) location.
6. Select Finish.
7. A NEC BackOffice Recorder shortcut is now displayed on
the desktop.
8. Click on the NEC BackOffice Recorder shortcut.
9. The Recorder screen is displayed. Refer to
Recorder Screen on page

Figure 9-37 Recorder Screen

10. Double click on the first line in the sequence to configure.
The Enter Line Details dialog box is displayed (each device
is identified with a unique serial number – followed by a 1, 2,
3 or 4 which identifies the port from left to right on the
device).
Choose European if in a territory that uses
A-Law or US for the US and territories that

use -Law.
9-47.
Figure 9-37
9-47