Figure 3-70 Wall Mount Spacing Guide (9.5" Chassis) - NEC Univerge SV9100 System Hardware Manual

Figure 3-70 Wall Mount Spacing Guide (9.5" Chassis)

3-58
4.2.2 Option 2 – Wall Mounting the 9.5 inch Base
Chassis
1. Use the template shown in
(9.5" Chassis)
TIP
2. Mark and drill four holes marked A, B, C and D.
3. Mount Anchor bolts (locally procured), in holes A and B drilled in step
2.
Because the bracket (upper) will be hooked onto the head of the

anchor bolts, allow the head to protrude approximately 0.14 to 15
in (3.5 to 4.0mm) from the wall (refer to
Bolt from Wall (9.5" Chassis) on page
Figure 3-54 Wall Mount Spacing Guide
for required spacing before drilling.
Plywood should first be installed on the wall where the
chassis will be positioned. This allows secure anchoring
of the screws, which support the weight of the chassis.
Issue 3.0
( )
CHS2UG B-US
(Figure 3-71 Anchor
3-59).
Installing the SV9100 Chassis