Issue 3.0
SV9100 System Hardware Manual
4.
Return the multiline terminal to the buttons side up position.
5.
Fit the projections on the side of the 8LK-L UNIT into the
guide holes on the side of the multiline terminal.
6.
Secure the 8LK-L UNIT with the two screws provided.
Figure 5-59 Securing the 8LK-L UNIT with Screws
7.
Turn the multiline terminal upside down.
8.
Open the small door covering the side option connectors by
pulling the cover handle to the front.
Figure 5-60 Install the 8LK-L UNIT Cable
Telephone
Connection Cable
Cover
9.
Connect the cable from the 8LK-L UNIT to the side option
connector (see
Figure 5-60 Install the 8LK-L UNIT
the multiline terminal and close the cover.
10.
Attach the side panel to the side of the 8LK-L UNIT.
11.
Return the multiline terminal to the buttons side up.
12.
Complete the installation by reattaching both plastic panels
to the front of the multiline terminal.
Side Option
Connector
Cable) on
5-63