Figure 4-19 Installing The Gpz-4Lcf/Gpz-8Lcf Daughter Board - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 4-19 Installing the GPZ-4LCF/GPZ-8LCF Daughter Board

SV9100 System Hardware Manual

GPZ-4LCF/GPZ-8LCF (4-Port/8-Port SLI Daughter Board)

The GPZ-4LCF and GPZ-8LCF daughter boards are mounted on the

GCD-4LCF/GCD-8LCF. These boards provide:

4-Port Single Line and 8-Port Single Line analog extension ports

(used for on-premise analog telephones, fax machines, and analog

The GCD-4LCF/GCD-8LCF is not rated for OPX use. A

GCD-4DIOPA blade should be used instead (it supports the analog

DID and single line telephone interface functions, such as Off-

Premise Extensions).

Connector for GCD-4LCF and GCD-4LCF Blades

Ring Generator

Caller ID Sending Ability

Message Wait Lamp Ability

Constant current type battery feeding (25mA / -28Vdc)

Feeding Polarity Reverse Ability

Table of Contents