Table 4-44 Gcd-Svr2 Lan Connector Pin-Outs - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
6.6.4.1 USB Interface
The GCD-SVR2 provides four USB interfaces that can be used
for the following type of devices:
USB Keyboard and mouse

USB Memory Device

6.6.4.2 VGA Display Interface
The GCD-SVR2 blade provides a VGA display interface
through a standard DB-15 connector.
6.6.4.3 10 Base-T/100 Base-TX/1000 Base-T Ethernet
Interface
The GCD-SVR2 blade provides two 10 Base-T/100 Base-TX/
1000 Base-T Ethernet interface through an RJ-45 connector.
Some possible uses for the LAN port are the following:
Software Update

Application Configuration


Table 4-44 GCD-SVR2 LAN Connector Pin-Outs

the pin-outs for the RJ-45 connector.
Table 4-44 GCD-SVR2 LAN Connector Pin-Outs
LAN Connector – (RJ45)
(10Base-T/100Base-TX)
1 8
Pin No. Connection
1
2
3
4
5
6
7
8
shows
Tx+
Tx-
Rx+
NC
NC
Rx-
NC
NC
4-111