Issue 3.0
Table 4-19 GCD-4LCF/GCD-8LCF LED Indications
LED Indication
Live LED
Busy LED (Red)
(Green)
On
On
Flash (1s)
On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 100ms
(On/Off)
SV9100 System Hardware Manual
4.5.3
LED Indications
LED indications for the GCD-4LCF
GCD-4LCF/GCD-8LCF LED
associated function and LED and Operational status.
Refer to
Figure 4-18 GCD-4LCF/GCD-8LCF Blade on page 4-47
location of the LEDs on the blades.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
4.5.4
Connectors
Table 4-20 GCD-4LCF/GCD-8LCF RJ-61 Cable Connector Pin-Outs on
page 4-50
show the pin-outs for the RJ-61 connector.
GCD-4LCF/GCD-8LCF Blade on page 4-47
connectors and the pin number locations on the GCD-4LCF/GCD-8LCF
blades.
/
GCD-8LCF are listed in
Indications. Each LED is listed with its
Remarks
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
shows the location of the
Table 4-19
for the
Figure 4-18
4-49