Figure 9-126 Remove Plastic Panels; Figure 9-127 Remove Numbered Keypad - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
16. Attach the analog trunk cable and the handset cable. Refer to
9-117 PSA-L UNIT Connections on page
17. Install the legs, pushing upwards until both locks snap into place.
18. Return tilt leg to desired position.
19. Place the multiline terminal numbered keypad up.
20. Connect the Line cord, the PSTN cable and the Handset cord (if
used).
21. Remove both plastic panels from the front of the multiline terminal.

Figure 9-126 Remove Plastic Panels

22. Pull tab down and lift out the numbered keypad panel.

Figure 9-127 Remove Numbered Keypad

Figure
9-134.
9-139