Issue 3.0
SV9100 System Hardware Manual
5.
Using tie wraps, secure CHS2U BATT CABLE INT in cable guide
bracket.
Figure 3-110 Secure Cable in Support Bracket
6.
With supplied screw, install cable guide in chassis.
Figure 3-111 Installing Cable Support Guide
7.
Install two 2.3 AH-12V batteries (locally procured) into the CHS2UG
BATT MTG KIT (refer to
3-90).
The first battery must be installed on the left side, then slid to the
right due to an installation tab on the mounting kit.
TIP
Figure 3-112 Installing Two Batteries on page
3-89