Setup; Setup Of Management Pc; Setup Of Hardware - NEC express5800 A2010b User Manual

Chapter 3 Setup
2.

Setup

Use the following procedure to setup the server efficiently.
2.1

Setup of Management PC

The management PC is used to control the system from the Web browser remotely, and view the configuration
information or log information. You need to prepare at least one unit of PC. For the requirements for
management PC, see Chapter 3 (5.5.4 Settings on remote terminal).
The management PC is used not only in daily operation but also in setup of the server. Preparing the
management PC before setting up, you can smoothly setup the server.
2.2

Setup of Hardware

Setup the server hardware in the following procedure
1. Install the rack
See Chapter 2 (2.1.1 Installing Rack).
2. Install the optional devices (If you bought separately)
See Chapter 2 (1. Installing / Removing Internal Options).
3. Install the server in the rack
See Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack).
4. Connect peripheral devices such as display unit, keyboard, and network devices to the server.
See Chapter 2 (2.2 Connection).
Important
5. Connect the power cord to the server and the PDU (Power Distribution Unit) or power outlet.
See Chapter 2 (2.2 Connection - 2.2.1 Connecting power cable) for details.
6. Configure the management LAN port on the server and connect LAN cable.
See Chapter 3 (5. EXPRESSSCOPE Engine SP3).
Important
7. Connect with the web console to make provide various settings.
See Chapter 3 (7. Using Remote Management).
8. Power on the server.
See Chapter 3 (3. Turning On the Server).
250
Do not connect the LAN cable to the management LAN port. Connect the LAN cable
after the management LAN port has been configured.
As for A2010M-60/A2010M-30/A2010M-15 model, be sure to connect a LAN cable to
the LAN port for management of both MGB#1 and MGB#2. As for A2010L-60 model,
connect a LAN cable to the management LAN port of MGB#1.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
2. Setup