NEC UNIVERGE SV8100 Features & Specifications Manual page 944

Issue 5.0
Guide to Feature Programming
Program
Number
11-16-01
16-01-03
20-06-01
20-09-07
20-13-06
Operation
To make a Step Call:
1. Place a call to a busy extension.
1 - 934
Program Name
1 Digit Service Code Setup - Step
Call
Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
Class of Service for Extensions
Class of Service Options
(Incoming Call Service) – Call
Queuing
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Description/Comments
Assign a single digit for step call
Assign if a call to busy station
hunts (1) or not hunts (0) to the
next available member of the Hunt
Group (Department Group).
. Refer Department Calling on
page 1-343 to set up the
Department Group.
Assign a Class of Service (1~15)
to an extension.
In an extension Class of Service,
turn On (1) or Off (0) Call Queuing
to the extension. This must be set
to (0) for Station Hunting to work.
In an extension Class of Service,
allows a busy extension to
manually (0) or automatically (1)
receive off-hook signals. This
must be set to (0) for Station
Hunting to work.
UNIVERGE SV8100
Assigned Data
SLT/MLT
Default not assigned
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Station Hunt