NEC UNIVERGE SV8100 Features & Specifications Manual page 843

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
15-07-01
20-06-01
20-13-06
Operation
When on a call:
To place a Reverse Voice Over call:
1. Press your Reverse Voice Over key (Program 15-07 or SC 851: 47 + destination extension).
Your Reverse Voice Over key lights steadily (red) and you can talk with the programmed Reverse Voice Over
.
destination.
To receive a Reverse Voice Over Call while busy:
1. Press the Voice Over key (Program 15-07 or SC 851: 48).
The voice over key allows you to switch back and forth between the initial call and the Reverse Voice Over Call.
.
To return to your initial caller:
1. Press the Reverse Voice Over key again.
If the co-worker you call hangs up, you return to the initial call automatically.
.
Reverse Voice Over
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Description/Comments
Assign a function key for Reverse
Voice Over (code 47 + destination
extension).
Assign a function key for Voice
Over to the destination extension
(code 48). This will allow the user
at the destination to switch
between calls if they where busy
when the Reverse Voice Over was
initiated.
Assign a Class of Service (COS)
to each extension (1~15).
Allows a busy extension to
Manually (0) or Automatically (1)
receive Off-Hook signals.
Issue 5.0
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
1 - 833