NEC UNIVERGE SV8100 Features & Specifications Manual page 974

Issue 5.0
Guide to Feature Programming
Program
Number
14-02-17
20-15-01
20-15-02
20-15-04
20-15-05
20-15-06
20-15-07
20-15-08
20-15-09
20-15-10
20-15-11
22-03-01
Operation
None
1 - 964
Program Name
Analog Trunk Data Setup – Sync.
Ringing
Ring Cycle Setup – Normal
Incoming Call on Trunk
Ring Cycle Setup – PBX, CES
Incoming Call
Ring Cycle Setup – DID/DISA/
VRS
Ring Cycle Setup – DID/DDI
Ring Cycle Setup – Dial-In in the
E&M Tie Line
Ring Cycle Setup – Door Box
Ringing for SLT
Ring Cycle Setup – Virtual
Extension Ring
Ring Cycle Setup – Callback
Ring Cycle Setup – Alarm for
SLT
VRS Waiting
Ring Cycle Setup –
Message Incoming
Call
Trunk Ring Tone Range – Ring
Tone Pattern
Description/Comments
Enable or disable per trunk.
Used to define the ring cycle for
Normal Incoming trunk calls.
Used to define the ring cycle for
PBX and CES incoming trunk
calls.
Used to define the ring cycle for
DID/DISA/VRS incoming calls.
Used to define the ring cycle for
DID/DDI incoming calls.
Used to define the ring cycle for
Dial IN and E&M Tie line calls.
Used to define the ringing cycle for
Door Box Ringing for SLT
terminals.
Used to define the ringing cycle for
Virtual Extensions.
Used to define the ringing cycle for
callbacks.
Used to define the ring cycle for
Alarm for SLT terminals.
Used to define the ring cycle for
incoming VRS Waiting messages.
Assign Ring Tone Ranges to
trunks. Trunks ring extensions
according to the Ring Tone Range
selected in Program 22-03-0 and
the settings made with either
Service Code 820 or Program
15-02-02.
UNIVERGE SV8100
Assigned Data
0 = Disable
1 = Enable (default)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 11)
Ringing Cycle = 1~13
(default = 5)
Ringing Cycle = 1~13
(default = 6)
0~8
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(default = 0)
Synchronous Ringing