NEC UNIVERGE SV8100 Features & Specifications Manual page 826

Issue 5.0
DID Services for either ISDN – BRI or PRI
Program
Number
22-02-01
22-09-01
22-11-01
22-11-02
1 - 816
Program Name
Incoming Call Trunk Setup
DID Basic Data Setup – Expected
Number of Digits
DID Translation Number
Conversion – Received Number
Translation Number Conversion
– Target Number
Description/Comments
Assign the incoming trunk type for
each trunk.
For each DID Translation Table
(1~20), enter the number of digits
the table expects to receive from
the CO (eight maximum). For
example, for a table used with
3-digit DID service, enter 3.
For additional DID Services refer
to Direct Inward Dialing (DID) on
page 1-385.
For each DID Translation Table
entry (1~2000), specify the digits
received by the system.
For each DID Translation Table
entry (1~2000), specify the
extension the system dials after
translation.
UNIVERGE SV8100
Assigned Data
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
1~8
(default = 4)
(maximum eight digits)
(default not assigned)
(maximum 24 digits)
(default not assigned)
Q-Sig