NEC UNIVERGE SV8100 Features & Specifications Manual page 536

Issue 5.0
Program
Number
20-31-07
20-31-08
20-31-09
20-31-10
20-31-11
20-31-12
20-31-13
20-31-14
20-31-15
1 - 526
Program Name
Timer Class Timer Assignment –
Ring No Answer Alarm Time
Timer Class Timer Assignment –
DIL/Incoming Ring Group No
Answer Time
Timer Class Timer Assignment –
DID Ring-No-Answer Time
Timer Class Timer Assignment –
Hold Recall Time (Non Exclusive
Hold)
Timer Class Timer Assignment –
Hold Recall CallBack Time (Non
Exclusive Hold)
Timer Class Timer Assignment –
Exclusive Hold Recall Time
Timer Class Timer Assignment –
Exclusive Hold Recall Callback
Time
Timer Class Timer Assignment –
Park Hold Time – Normal
Timer Class Timer Assignment –
Delayed Call Forwarding Time
(Call Forward No Answer)
Description/Comments
If a trunk rings a multiline
telephone longer than this interval,
the system changes the ring
cadence. This indicates to the
user that the call has been ringing
too long.
Longer than this interval diverts to
the DIL No Answer Ring Group
(set in Program 22-08).
In systems with DID
Ring-No-Answer Intercept, this
interval sets the Ring-No-Answer
time. This interval is how long a
DID call rings the destination
extension before rerouting to the
intercept ring group.
A call on Hold recalls the
extension that placed it on Hold
after this time. This time works
with the Hold Recall Callback Time
(Program 24-01- 02).
A trunk recalling from Hold or Park
rings an extension for this time.
This time works with Hold Recall
Time or Park Hold Time. After this
time, the system invokes the Hold
Recall Time again. Cycling
between time Program 24-01-01
and 24-01-02 and Program
24-01-06 and 24- 01-07 continues
until a user answers the call.
A call left on Exclusive Hold recalls
the extension that placed it on
Hold after this time.
An Exclusive Hold Recall rings an
extension for this time. If not
picked up, the call goes back on
System Hold.
Use to assign the Park Hold time
on a class of service basis.
If activated at an extension,
Delayed Call Forwarding occurs
after this time. This also sets how
long a Transferred call waits at an
extension forwarded to Voice Mail
before routing to the called
extension mailbox.
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 20 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 10 seconds)
Flexible Timeouts