NEC UNIVERGE SV8100 Features & Specifications Manual page 114

Issue 5.0
Program
Number
20-06-01
20-08-17
21-02-01
26-01-01
26-01-02
26-01-03
1 - 104
Program Name
Class of Service for Extensions
Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
Trunk Group Routing for
Extensions
Automatic Route Selection
Service – ARS Service
Automatic Route Selection
Service – Network Outgoing
Inter-Digit ARS Timer
Automatic Route Selection
Service – ARS Misdialed Number
Handling
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension
capability to override the trunk
access map programming
(Program 14-07-01 and Program
15-06-01) for outgoing calls.
Use this program to assign
Program 14-06 routes to
extensions.
Enable (1) or disable (0) ARS.
With Networking, this timer
(0~64800 seconds) replaces
Program 20-03-04 when
determining if all network protocol
digits are received. If ARS is
enabled at Site B, this timer can
be programmed for 5 (500 msec)
at Site A. If ARS is disabled and
Site B is using F-Route for
outbound dialing, this timer should
be programmed for 30 (3 seconds)
at Site A.
If a user dials a number not
programmed in ARS, this option
determines if the system should
route over trunk group 1 (0) or play
error tone (1).
UNIVERGE SV8100
Assigned Data
Day/Night Mode: 1~8
Class of Service for
Extensions: 1~15
Defaults:
Extension number 101
as Class 15.
All other extension
numbers are set as
Class 1.
0 = Off
1 = On
(default = 0 for COS
01~15)
Day/Night Mode: 1~8
Route Table Number:
0~100
(0 = No Setting)
(default = 1)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0~64800 (seconds)
(default = 30 seconds)
0 = Route to Trunk
Group 1
1 = Play Warning Tone
to Dialer
(default = 0)
Automatic Route Selection