NEC UNIVERGE SV8100 Features & Specifications Manual page 920

Issue 5.0
Guide to Feature Programming
Program
Number
10-09-01
11-10-04
11-10-05
11-11-39
11-12-10
11-12-11
11-12-40
13-01-01
13-01-03
1 - 910
Program Name
DTMF and Dial Tone Circuit
Setup
Service Code Setup (for System
Administrator) – Storing
Common Speed Dialing
Numbers
Service Code Setup (for System
Administrator) – Storing Group
Speed Dialing Numbers
Service Code Setup (for Setup/
Entry Operation) – Station Speed
Dial Number Entry
Service Code Setup (for Service
Access) – Common/Station
Speed Dialing
Service Code Setup (for Service
Access) – Group Speed Dialing
Service Code Setup (for Service
Access) - Station Speed Dialling
Speed Dialing Option Setup –
Speed Dialing Auto Outgoing
Call Mode
Speed Dialing Option Setup –
Number of Common Speed
Dialing Bins
Description/Comments
If dial tone detection is enabled, be
sure to allocate at least one circuit
for dial tone detection (Type 0 or
2).
Used to customize the service
code used for storing Common
Speed Dialing Numbers.
Used to customize the service
code used for storing group speed
dialing numbers.
Used to customize the service
code used for entering station
speed dial numbers.
Assign Service code for accessing
System Speed Dial bins (default
813).
Used to customize the service
code for group speed dialing.
Assign Service code for accessing
System Speed Dial bins (default
761).
Designate trunk or intercom
outgoing mode, (default: 0, trunk).
Designate the bins the system
uses for System Speed Dialing.
Speed Dial – System/Group/Station
UNIVERGE SV8100
Assigned Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
MLT
(default = 853)
MLT
(default = 854)
MLT, SLT
(default = 855)
MLT, SLT
(default = 813)
MLT, SLT
(default = 814)
MLT, SLT
(default = 761)
0 = Trunk Outgoing
Mode
1 = Intercom Outgoing
Mode
(default = 0)
0~2000
0 = No Common
Speed Dialing
(default = 1000)