NEC UNIVERGE SV8100 Features & Specifications Manual page 644

Issue 5.0
Related Features
Automatic Route Selection
Repeat Redial
Save Number Dialed
Guide to Feature Programming
Program
Number
11-12-12
11-12-17
15-02-13
20-08-05
Operation
To redial your last call:
1. Without lifting the handset, press Redial.
The last dialed number is displayed.
.
2. To redial the last number, press
- OR -
Search for the desired number from the Redial List by pressing Redial or VOLUME up or VOLUME
down keys.
3. Lift the handset or press Speaker to place the call.
1 - 634
Program Name
Service Code Setup (for Service
Access) – Last Number Dial
Service Code Setup (for Service
Access) – Clear Last Number
Dialing Data
Multiline Telephone Basic Data
Setup – Redial List Mode
Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
.
#
Description/Comments
Assign a service code (816) to use
Last Number Dial.
Assign a service code (876) to
clear the Last Number Dial.
Select the type of numbers that
are stored in the Redial List –
Internal and External numbers (0)
or External only (1).
Turns Off (0) or On (1) an
extension ability to use Dial
Number Preview. This program
also turns Off or On the Last
Number Redial function.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 816)
MLT, SLT
(default = 876)
0 = ICM/Trunk
(Extension/Trunk
Mode)
1 = Trunk Mode
(default = 1)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Last Number Redial