NEC UNIVERGE SV8100 Features & Specifications Manual page 311

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
11-11-34
11-11-36
20-08-06
21-01-07
21-07-01
21-14-01
21-14-02
35-02-01
35-02-02
35-02-03
Code Restriction Override
Program Name
Service Code Setup (for Setup/
Entry Operation) – Temporary
Toll Restriction Override
Service Code Setup (for Setup/
Entry Operation) – Toll
Restriction Override
Class of Service Options
(Outgoing Call Service) –
Temporary Toll Restriction
Override
System Options for Outgoing
Calls – Toll Restriction Override
Time
Toll Restriction Override
Password Setup
Walking Toll Restriction
Password Setup – User ID
Walking Toll Restriction
Password Setup – Walking Toll
Restriction Class Number
SMDR Output Options – Toll
Restricted Call
SMDR Output Options – PBX
Calls
SMDR Output Options – Trunk
Number or Name
Description/Comments
If required, change the service
code (875) for Temporary Toll
Restriction Override.
If required, change the service
code (763) for Toll Restriction
Override.
Turn off or on Temporary Toll
Restricting Override (Service
Code 875).
Set the Toll Restriction Override
Time. After dialing the Toll
Restriction Override codes, the
system removes Toll Restriction
for this Time.
Assign Toll Restriction Override
codes to extensions. Each code
must have four digits, using any
# *
combination of 0~9, and
extension can have a separate
code, or many extensions can
share the same override code.
Enter the Walking Toll Restriction
Override User ID codes (six digits)
into tables. Up to 500 different
override codes can be entered.
Enter the Walking Toll Restriction
Class of Service (1~15) to be used
for each table number assigned in
Program 21-14-01.
SMDR can include or exclude calls
blocked by Toll Restriction.
When the system is behind a PBX,
SMDR can include all calls or just
calls dialed using the PBX trunk
access code.
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports.
. If this option is set to 0,
Program 35-02-14 must be
set to 0.
Issue 5.0
Assigned Data
MLT, SLT
(default = 875)
MLT, SL7
(default = 763)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
Maximum four digits
# *
(0~9, , )
(default not assigned)
. Each
Dial (Six digits)
(default not assigned)
1~15
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
1 - 301