NEC UNIVERGE SV8100 Features & Specifications Manual page 23

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
14-01-11
15-07-01
20-06-01
21-01-04
35-05-01
35-05-02
35-05-03
Account Code Entry
Program Name
Basic Trunk Data Setup –
Account Code Required
Programmable Function Keys
Class of Service for Extensions
System Options for Outgoing
Calls – Dial Tone Detection Time
Account Code Setup – Account
Code Mode
Account Code Setup – Forced
Account Code Toll Call Setup
Account Code Setup – Account
Codes for Incoming Calls
Description/Comments
Enable (1) or disable (0) Account
Codes for each trunk.
Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
*
enter the before and after the
Account Code.
Assign a Class of Service (1~15)
to an extension.
Adjust the interval the system
waits for the Telco to return Dial
Tone.
Use this option to select the
Account Code Mode.
Enable Account Codes for all calls
or just toll calls (for mode 2 or 3 in
Program 35-05-01).
For each Class of Service (1~15),
enter 1 in this option to enable
Account Codes for incoming calls.
Enter 0 to disable Account Codes
for incoming calls. If disabled, any
codes you enter dial out on the
connected trunk.
Issue 5.0
Assigned Data
0= Disable
1= Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0~64800 (seconds)
(default = five seconds)
0 = Account Codes
Disabled (Codes
entered dial out as part
of initial call.)
1 = Account Codes
optional (not required).
2 = Account Codes
required but not
verified.
3 = Account Codes
required (forced) and
verified.
(default = 0)
0 = Account Codes for
toll and local calls (All)
1 = Account Codes just
for toll calls (STD)
(default = 0)
0 = Account Codes for
incoming calls disabled
(No)
1 = Account codes for
incoming calls (Yes)
(default = 0)
1 - 13