NEC UNIVERGE SV8100 Features & Specifications Manual page 184

Issue 5.0
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table
.
Refer to Direct Inward Dialing (DID) for additional DID programming.
Program
Number
22-11-05
22-11-06
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a multiline terminal only, press the Call Forwarding Programmable Function keys (Program
15-07-01, Program 15-07-10 ~Program 15-07-15 or SC 851 Key Code 10~15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9+2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1~9, 01~99 or 001~100) or 805 +
.
Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
.
To cancel Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
1 - 174
Program Name
DID Translation Table Number
Conversion – Transfer
Destination Number 1
DID Translation Table Number
Conversion – Transfer
Destination Number 2
Description/Comments
For each DID Translation Table
entry (1-2000), specify the first
and second Transfer Destinations
if the callers receives a busy or no
answer (action defined in Program
22-11-04)
. If the Transfer Destinations
are busy or receive no
answer, those calls are
transferred to the final
transfer destination (Program
22-10).
Call Forwarding, Off-Premise
UNIVERGE SV8100
Assigned Data
0 = No Setting
1~100 = Incoming
Group
101 = (Not Used)
102 = In-Skin/External
Voice Mail or InMail
201~264 = Extension
Group
400 = Valid Extension
Number
401 = DISA
501~548 = DISA/VRS
Message
1000~999 = Speed
Number (000~999)
(default = 0)