NEC UNIVERGE SV8100 Features & Specifications Manual page 283

UNIVERGE SV8100
Program
Number
20-13-51
20-14-01
20-14-02
20-14-03
20-14-04
20-14-05
20-14-06
20-14-07
20-14-08
20-14-09
Class of Service
Program Name
Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Class of Service Options for
DISA/E&M – First Digit
Absorption (Delete First Digit
Dialed)
Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
Class of Service Options for
DISA/E&M – Trunk Group
Access
Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
Class of Service Options for
DISA/E&M – Operator Calling
Class of Service Options for
DISA/E&M – Internal Paging
Class of Service Options for
DISA/E&M – External Paging
Class of Service Options for
DISA/E&M – Direct Trunk Access
Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
Description/Comments
Determine if an extension name
and number are listed (On) or
unlisted (Off) in the directory.
For Tie Lines, enable or disable
the ability to absorb (ignore) the
first incoming digit. Use this to
make the tie trunk compatible with
3- and 4-digit Tie Line service.
This option does not apply to
DISA.
This option enables or disables a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
This option enables or disables a
DISA or tie trunk caller's ability to
access trunk groups for outside
calls (Service Code 804).
This option enables or disables a
DISA or tie trunk caller's ability to
use System Speed Dialing.
This option enables or disables a
DISA or tie trunk caller's ability to
dial 0 for the telephone system
operator.
This option enables or disables a
DISA or tie trunk caller's ability to
use the telephone system Internal
Paging.
This option enables or disables a
DISA or tie trunk caller's ability to
use the telephone system External
Paging.
This option enables or disables a
DISA or tie trunk caller's ability to
use Direct Trunk Access (Service
Code 805).
This option enables or disables a
tie trunk caller's ability to use
Forced Trunk Disconnect (Service
Code 724). This option is not
available to DISA callers.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
1 - 273