NEC UNIVERGE SV8100 Features & Specifications Manual page 15

UNIVERGE SV8100
Conditions
If a user enters a code that exceeds the 16 digit limit, the system ignores the Account Code
Entry.
If the system has Account Codes disabled, the digits dialed (e.g.,
SMDR report as part of the number dialed.
If using Forced Account Code with single line telephone you need a VRS to get the prompts
to enter the Forced Account Code.
When you use Forced Account Code on only toll calls, and you dial a local call, you hear a
beep.
Speed Dial – System/Group/Station bins can contain stored Account Codes. They can be
prevented from being displayed using Program 20-07-04.
To simplify Account Code Entry, store the Account Code (e.g.,
Just press the key instead of dialing the codes.
Account Codes appear on the SMDR report (even if they are hidden on the telephone
display).
Do not use an asterisk within a PBX/CTX access code when using Account Codes. The
causes the trunk to stop sending digits to the central office until another
Account Codes for incoming calls not available for single line telephones.
Default Settings
Account Codes are disabled.
System Availability
Terminals
Any Station
Required Component(s)
VRS for Forced Account Codes for Single Line Telephones
Account Code – Forced/Verified/Unverified
Issue 5.0
* *
1234 ) appear on the
* *
1234 ) in a One-Touch Key.
*
is entered.
*
,
1 - 5