NEC UNIVERGE SV8100 Features & Specifications Manual page 24

Issue 5.0
Program
Number
35-05-04
35-06-01
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for incoming
calls. This procedure is not available for single line telephones.
*
1. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial shows an
.
*
3. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
1 - 14
Program Name
Account Code Setup – Hiding
Account Codes
SMDR Account Code Setup –
Verified Account Code
Description/Comments
For each Class of Service (1~15),
enter 1 to have the system hide
Account Codes on an extension
display as they are entered. Enter
0 to have the Account Codes
displayed.
Use this table to enter Account
Codes into the Verification
Account Code List. You can enter
up to 2000 codes with three ~ six
digits, using the characters 0 ~ 9
#
or . Use the LK1 to enter a wild
card. For example, the entry
@234 means the user can enter
0234-9234.
).
#
*
on the telephone display.
UNIVERGE SV8100
Assigned Data
0 = Display Account
Codes
1 = Hide Account
Codes
(default = 0)
Up to 16 digits
#
Enter: 1~9, 0, , @
(@ = Wild Card)
(default not assigned)
Account Code Entry