NEC UNIVERGE SV8100 Features & Specifications Manual page 922

Issue 5.0
Program
Number
13-04-08
13-04-09
13-04-10
13-04-11
13-05-01
14-02-06
15-02-04
15-02-58
1 - 912
Program Name
Memo 1
Memo 2
memo 3
Mailbox Number
Speed Dialing Trunk Group –
Trunk Group Number
Analog Trunk Data Setup –
Pause at 1st digit after Line
Seize in Manual Dial Mode
Multiline Telephone Basic Data
setup – Redial (Speed Dial )
Control
Display Mode of Incoming Trunk
Description/Comments
Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 1.
Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 2.
Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 3.
Per Speed Dial Bin No.
(0000~1999), set the voice mail
box number. Incoming Caller ID
number will be checked with
Speed Dial Data (PRG 13-04-01).
From matched Speed Dial Bin No.,
the system finds the voice mail
box number according to this
PRG.
For each System Speed Dialing
number, enter the routing option
Trunk Group Number (1~100) to
dial out on.
Enable/disable the system ability
to pause after dialing the first digit.
Assign the extension Redial key
for either Common (0) or Group
(1) Speed Dialing.
On receipt of caller ID matching
abdial location defines whether the
caller ID and name or memo
entries are displayed initially
Speed Dial – System/Group/Station
UNIVERGE SV8100
Assigned Data
Maximum of 28 digits.
(default - not assigned)
Maximum of 28 digits.
(default - not assigned)
Maximum of 28 digits.
(default - not assigned)
0~544
Station Mail Box (512)
+
Group Mail Box (32) =
544
(default - not assigned)
0~100
(default not assigned)
0 = No Pause (No)
1 = Pause (Yes)
(default = 1)
0 = Common and
Individual Speed
Dialing
1 = Group Speed
Dialing
(default = 0)
0 = Caller ID
1 = Memo Information
(default = 0)