NEC UNIVERGE SV8100 Features & Specifications Manual page 771

UNIVERGE SV8100
Program
Number
31-01-02
31-03-01
31-04-01
31-05-01
31-06-01
31-06-02
31-06-04
Paging, External
Program Name
System Options for Internal/
External Paging – Page
Announcement Duration
Internal Paging Group Settings –
Internal Paging Group Name
External Paging Zone Group
Universal Night Answer/Ring
Over Page
External Speaker Control –
Broadcast Splash Tone before
Paging (Paging Start Tone)
External Speaker Control –
Broadcast Splash Tone after
Paging (Paging End Time)
External Speaker Control –
CODEC Transmit Gain Setup
Description/Comments
Set the maximum allowable
duration for a Paging
announcement.
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
Assign each External Paging
Speaker to an External Paging
Group (1~8) used for accessing
the zone. If zones 1~8 are not
connected to PGD(2)-U10 ADP,
set these unused zones to
External Paging Group 0.
Assign Universal Night Answer
ringing to each External Paging
zone. For each trunk port, make a
separate entry for each External
Paging Speaker.
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
Assign option for each External
Paging Speaker (1~9).
Use to define the CODEC
transmitting gain settings for the
external speaker using an
amplifier.
Issue 5.0
Assigned Data
0~64800 (seconds)
(default = 1200
seconds)
Up to 12 characters
Refer to Programming
Manual for table.
External Paging
Speaker/Zones: 1~9
Speaker 1 [PGD(2)-
U10] = 1 (Group 1)
Speaker 2 [PGD(2)-
U10] = 2 (Group 2)
Speaker 3 [PGD(2)-
U10] = 3 (Group 3)
Speaker 4 [PGD(2)-
U10] = 4 (Group 4)
Speaker 5 [PGD(2)-
U10] = 5 (Group 5)
Speaker 6 [PGD(2)-
U10] = 6 (Group 6)
Speaker 7 [PGD(2)-
U10] = 7 (Group 7)
Speaker 8 [PGD(2)-
U10] = 8 (Group 8)
Speaker 9 (CD-CP00)
= 1 (Group 1)
External Paging
Speaker/Zones: 1~9
0 = No Ringing (No)
1 = Ringing (Yes)
(default = 0)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
1~63 (-15.5 ~ +15.5dB)
(default = 32)
1 - 761