NEC UNIVERGE SV8100 Features & Specifications Manual page 489

UNIVERGE SV8100
Program
Number
20-17-01
21-01-02
22-02-01
24-02-03
25-01-02
25-02-01
Embedded VRS
Program Name
Operator Extension – Operator's
Extension Number
System Options for Outgoing
Calls – Intercom Interdigit Time
Incoming Call Trunk Setup
System Options for Transfer –
Delayed Call Forwarding Time
VRS/DISA Line Basic Data Setup
– DISA User ID
DID/DISA VRS Message
Description/Comments
Designate an extension an
operator. When a message is left
in the embedded VRS mailbox,
the notification is displayed on this
extension
When placing Intercom calls,
users must dial each digit within
this time.
For each Night Service mode,
enter 1 if trunk should be
automatically answered by VRS
Automated Attendant.
Set how long a telephone rings
before the call reroutes to the
programmed destination.
Select whether or not the DISA
User ID is to be used.
For each Night Service mode,
enter 1 at the "Talkie" prompt if
trunk should be automatically
answered by VRS and the
message number the caller should
hear (1~100).
Issue 5.0
Assigned Data
Up to eight digits
(default not assigned)
0~64800 (seconds)
(default = 10 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0~64800 (seconds)
(default = 10)
0 = Off
1 = On
(default = 1)
0 = No Message
1 = 01~100 (VRS
Messages)
2 = 01~4 (ACI Group
Number)
3 = 01~64 (Extension
Group Number)
(default = 0)
1 - 479