NEC UNIVERGE SV8100 Features & Specifications Manual page 335

UNIVERGE SV8100
Program
Number
20-34-02
20-34-03
20-34-04
20-34-05
Related Features
Barge-In
The Barge-In feature cannot be used for an extension user on a Remote Conference call.
Call Forward
The Remote Conference pilot number can not be set as the destination for Call Forward.
Hold
Using Hold while on a Remote Conference call is not possible.
Networking
With Networking, each system must have a VRS.
Conference, Remote
Program Name
Remote Conference Group
Setup - Password
Remote Conference Group
Setup - Maximum Participants
Remote Conference Group
Setup - Maximum Conference
Duration
Remote Conference Group
Setup - End Tone Alert Time
Description/Comments
For each conference group, define
the 4-digit password of a Remote
Conference.
For each conference group, define
the maximum number of
participants of a Remote
Conference (0-32).
For each conference group, define
the maximum duration of a
Remote Conference. When this
time passes, the conference is
disconnected by the SV8100.
For each conference group,
determine how long prior
disconnecting a Remote
Conference call (based on the
maximum conference duration
above) the SV8100 should send
out a beep.
This is used to warn the
conference participants of the
pending disconnect.
Issue 5.0
Assigned Data
Fixed 4 digits dial
(0-9,@)
(default:
Group1 - 1111
Group2 - 2222
Group3 - 3333
Group4 - 4444)
0~32
(default = 8)
0~64800
(default = 7200)
0~64800
(default = 300)
1 - 325