NEC UNIVERGE SV8100 Features & Specifications Manual page 25

UNIVERGE SV8100
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
You can press a line key or dial a code (except 9) to access a trunk. Refer to
.
page 1-245 for more information.
*
2. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,
.
each digit you dial shows an
*
4. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected trunk.
.
*
2. Dial .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
.
*
4. Dial .
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.
.
*
2. Dial .
3. Enter Account Code (1~16 digits).
*
4. Dial .
5. Dial number you want to call.
Account Code Entry
*
on the telephone display.
Central Office Calls, Placing on
).
#
Issue 5.0
1 - 15