NEC UNIVERGE SV8100 Features & Specifications Manual page 327

UNIVERGE SV8100
Program
Number
20-11-21
20-13-08
20-13-10
20-13-15
20-13-16
20-14-11
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press Conf or Conf softkey (Program 15-07 or SC 851: 07).
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
Conference
Program Name
Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Class of Service Options
(Supplementary Service) –
Conference
Class of Service Options
(Supplementary Service) –
Barge-In Monitor
Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
Class of Service Options
(Supplementary Service) –
Barge-In, Receive
Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
Description/Comments
Allow (0) or deny (1) an extension
users's ability to set up a tandem/
conference call automatically
when they hang up.
Turn off or on an extension ability
to initiate a conference or Meet Me
Conference.
In an extension Class of Service,
enable the Barge-In Speech Mode
(0) or Monitor Mode (1) at the
initiating extension (i.e., Barge-In
initiator).
Turns Off (0) or On (1) an
extension user ability to barge-in
on other's calls.
In an extension Class of Service,
turn On (1) or Off (0) Barge-In at
the receiving extension (i.e.,
Barge-In receive).
In an extension Class of Service,
enable (1) or disable (0) a DISA or
tie trunk user from using the
Barge-In feature.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
1 - 317