Table 1-11 Extension Busy Setup - NEC UNIVERGE SV8100 Features & Specifications Manual

Issue 5.0
Program
Number
20-13-06
21-01-09
21-11-01
22-01-01
30-05-02
30-05-03
30-05-04
30-05-05
30-05-06
30-05-07
30-05-08
1 - 596
Program Name
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
System Options for Outgoing
Calls – Ringdown Extension
Timer (Hotline Start)
Extension Ringdown (Hotline)
Assignment
System Options for Incoming
Calls – Incoming Call Priority
DSS Console Lamp Table – Busy
Extension
DSS Console Lamp Table – DND
Extension
DSS Console Lamp Table – ACD
Agent Busy
DSS Console Lamp Table – Out
of Schedule (ACD DSS)
DSS Console Lamp Table – ACD
Agent Log Out (ACD DSS)
DSS Console Lamp Table – ACD
Agent Log In (ACD DSS)
DSS Console Lamp Table – ACD
Agent Emergency (ACD DSS)
Description/Comments
Program 20-02-03 and Program
20-13-06 set the conditions under
which a Hotline, Reverse Voice
Over or DSS Console key
indicates that an extension is busy.
With condition 1 in the following
chart, the BLF LED is on only
when both extension line
appearances are busy. In
conditions 2~4, the BLF LED is on
when one line appearance is busy.
A Ringdown extension
automatically calls its programmed
destination after this time.
Define the Hotline destination
number for each extension
number.
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
Use to define the LED patterns for
busy extensions on the DSS
consoles.
Use to define the LED patterns for
DND extensions on the DSS
consoles.
Use to define the LED patterns for
busy ACD agents function on the
DSS consoles.
Use to define the LED patterns for
out of schedule (ACD/DSS) on the
DSS consoles.
Use to define the LED patterns for
ACD agents that are logged out on
the DSS consoles.
Use to define the LED patterns for
ACD agents that are logged in the
DSS consoles.
Use to define the LED patterns for
ACD agents in emergency on the
DSS consoles.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
Refer to Table 1-11
Extension Busy Setup
on page 1-598
0~64800
(default = 5)
(maximum 24 digits)
*
#
0, , , Pause, Hook
Flash, @ (Code to wait
for answer supervision)
(default not assigned)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
0~7
[default = 7 (On)]
0~7
[default = 3 (RW)]
0~7
[default = 7 (On)]
0~7
[default = 0 (Off)]
0~7
[default = 5 (IL)]
0~7
[default = 4 (IR)]
0~7
[default = 6 (IW)]
Hotline