Mobile Extension - NEC UNIVERGE SV8100 Features & Specifications Manual

UNIVERGE SV8100
Description
A mobile extension is an external telephone (preferably a mobile phone) linked to the UNIVERGE
SV8100 via a Proxy Port to operate as an internal SLT extension. The extension sends DTMF signals to
the system allowing access to the system features. A registered Mobile Extension uses 1 analog port
(ports are reserved in groups of 4), however, no PCB support (analog or digital) is required. The Mobile
Extension port must be an unequipped extension port on the UNIVERGE SV8100 system - no physical
keyset is required on the SV8100 system.
.
A mobile extension cannot be used as a voice mail port.
This feature can currently be used with ISDN PRI trunks or SIP trunks.
.
It is recommended to use this feature with an ISDN PCB (PRI or BRI), however, analog trunks can be used as well.
.
To provide a proper disconnect, Disconnect Supervision is required for the trunks used for this feature.
The Mobile extension internal extension number (Proxy Port) is linked to a speed dial bin to provide
integration.

Mobile Extension

Figure 1-11 Mobile Extension Layout
Mobile Extension
Issue 5.0
1 - 685