NEC UNIVERGE SV8100 Features & Specifications Manual page 334

Issue 5.0
Guide to Feature Programming
Program
Number
11-19-01
14-01-02
14-01-03
14-01-04
14-01-05
14-02-09
20-13-46
20-34-01
1 - 324
Program Name
Remote Conference Pilot
Number Setup - Maximum
Channels
Basic Trunk Data Setup –
Transmit Level
Basic Trunk Data Setup –
Receive Level
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
Analog Trunk Data Setup – Busy
Tone Detection
Class of Service Options
(Supplementary Service) –
Remote Conference
Remote Conference Group
Setup - Conference Name
Description/Comments
Assign the pilot number (up to 8
digits) to be used for the Remote
Conference. This is the number
that outside parties will call in
order to connect to a conference.
The option sets the amount of
transmit gain (signal amplification)
for the trunk being programmed.
The option sets the amount of
receive gain (signal amplification)
for the trunk being programmed.
The option sets the amount of
transmit gain (signal amplification)
for the trunk being programmed
when it's part of an Unsupervised
Conference or transferred.
The option sets the amount of
receive gain (signal amplification)
for the trunk being programmed
when it's part of an Unsupervised
Conference or transferred.
Enable (1) this option to allow
analog trunks which can not detect
disconnecting to be
released at the end of the
conference.
For each Class of Service (01-15),
determine whether an extension
should be able to place an
intercom call to join a Remote
Conference call.
For each conference group, enter
the name (up to 12 characters)
displayed at the time of a Remote
Conference. This entry will display
on the keyset LCD.
UNIVERGE SV8100
Assigned Data
Dial (Up to 8 digits)
(default: No Remote
Conference Pilot
Numbers assigned to
any Conference Group
(1-4).)
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
0 = Disable
1 = Enable
(default = 0)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Maximum 12
characters
(default:
Group1 - Conf 1
Group2 - Conf 2
Group3 - Conf 3
Group4 - Conf 4)
Conference, Remote