NEC UNIVERGE SV8100 Features & Specifications Manual page 110

Issue 5.0
Trunk Queuing/Camp On
Guide to Feature Programming
Program
Number
11-01-01
11-09-01
11-09-02
12-01-01
12-01-02
12-02-01
1 - 100
Program Name
System Numbering
Trunk Access Code
2nd Trunk Route Access Code
Night Mode Function Setup –
Manual Night Mode Switching
Night Mode Function Setup –
Automatic Night Mode Switching
Automatic Night Service
Patterns –Start Time
Description/Comments
Set the system internal (Intercom)
numbering plan. The numbering
plan assigns the first and second
digits dialed and affects the digits
an extension user must dial to
access other extensions and
features, such as service codes
and trunk codes. If the default
numbering plan does not meet the
site requirements, use this
program to tailor the system
numbering to the site.
Specify the digit or digits to be
used to access ARS (normally 9).
Use this program to define
additional trunk access
codes.When a user dials the
Alternate Trunk Route Access
Code, the system routes their call
to the Alternate Trunk Route.
Turn Off (0) or On (1) any
extensions from activating Manual
Night Service.
According to a preset schedule,
enable (1) or disable (0) Automatic
Night Service for the system.
Make sure to set the Service
Patterns in Program 12-02-01,
Program 12-02-02 and Program
12-02-03.
Define the daily pattern of the
Automatic Mode Switching. Each
Mode Group has 10 patterns.
These patterns are used in
Programs 12-03 and 12-04. The
daily pattern consists of 20 timer
settings.
This option defines the starting
time.
UNIVERGE SV8100
Assigned Data
Refer to SV8100
Programming Manual
for a detailed
description of this
program.
Dial up to four digits
(default = 9)
Dial up to four digits
(default not assigned)
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 0)
0000~2359
Refer to the SV8100
Programming Manual
for defaults.
Automatic Route Selection