NEC UNIVERGE SV8100 Features & Specifications Manual page 659

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
14-05-01
14-07-01
15-06-01
Loop Keys
Program Name
Trunk Group – Trunk Group
Number
Trunk Access Map Setup
Trunk Access Map for
Extensions
Description/Comments
Assign trunks to trunk groups. In
general, loop keys access trunks
within specific trunk
groups.
Set up the Trunk Access Maps.
For example, if an extension's loop
key is for incoming and
outgoing, make sure the Trunk
Access Map allows incoming and
outgoing access. Also see
Program 15-06 below.
Assign Trunk Access Maps to
extensions. Also see Program 14-
07 above.
Issue 5.0
Assigned Data
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order)
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Map 1 = Trunk
Ports 1~200 assigned
with option 7 access
(incoming and outgoing
access and access
when trunk is on Hold).
Access Map 2~200 =
Trunk Ports 1~200
assigned with option 0
(No access).
Trunk Access Maps:
1~200
(default = 1)
1 - 649