NEC UNIVERGE SV8100 Features & Specifications Manual page 618

Issue 5.0
Operation
To place an Intercom call:
1. At multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial extension number (or 0 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts the called
.
extension.
If the extension you call is busy or does not answer, you can dial another extension without hanging up.
.
To answer an Intercom call:
1. If you hear two beeps, speak toward telephone.
Your telephone picks up your voice.
.
- OR -
If your telephone rings, lift the handset.
To check the extension data (multiline terminal only):
1. Press the Help key.
1 - 608
Incoming Ring
Tone Number
Pattern 2 High
(Trunk Incoming) Mid
Low
Pattern 3 High
(Trunk Incoming) Mid
Low
Pattern 4 High
(Trunk Incoming) Mid
Low
Intercom Incoming High
Pattern Mid
Low
Alarm Sensor Pattern High
Mid
Low
Table 1-12 Incoming Ringing Tone
Tone
Frequency 1
Type
1100
660
520
2000
1400
1100
2000
1400
1100
1100
660
520
760
760
760
UNIVERGE SV8100
Frequency 2 Modulation
1400 8Hz Modulation
760 8Hz Modulation
660 8Hz Modulation
760 16Hz Modulation
660 16Hz Modulation
540 16Hz Modulation
760 8Hz Modulation
660 8Hz Modulation
540 8Hz Modulation
1400 8Hz Modulation
760 8Hz Modulation
660 8Hz Modulation
760 No Change
760 No Change
760 No Change
Intercom