NEC UNIVERGE SV8100 Features & Specifications Manual page 580

Issue 5.0
Program
Number
15-02-06
15-02-07
15-02-11
15-06-01
15-07-01
16-02-01
20-06-01
20-11-09
1 - 570
Program Name
Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
Multiline Telephone Basic Data
Setup – Automatic Hold for CO
Lines
Multiline Telephone Basic Data
Setup – Callback Automatic
Answer
Trunk Access Map for
Extensions
Programmable Function Keys
Department Group Assignment
for Extensions
Class of Service for Extensions
Class of Service Options (Hold/
Transfer Service) – Group Hold
Initiate
Description/Comments
Use this option to set the function
of the Multiline Hold key. The Hold
key can activate normal Hold or
Exclusive Hold.
Determines whether an extension
will disconnect the trunk line (1) or
automatically hold it (0) when you
direct select a CO line without
placing the call on hold first.
Automatic Hold does not work until
the elapse call timer is displayed.
Enable (1) or disable (0) Callback
Automatic Answer.
Assign Trunk Access Maps to
extensions.
Assign a function key for Exclusive
Hold (code 45). If an extension
has its fixed Hold key reassigned
(in Program 15-02-06), assign a
function key for System Hold
(code 44).
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Assign a Class of Service (1~15)
to extensions.
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to initiate Group
Hold (Service Code 732).
UNIVERGE SV8100
Assigned Data
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
0 = Hold
1 = Disconnect (Cut)
(default = 1)
0 = Off
1 = On
(default = 1)
Trunks 1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Hold