ABB ACS550 User Manual page 108

108
Code Description
11 = 1. – Assigns Start/Stop control to Timed Function 1 (Timed Function activated =
TIMED FUNC
Function de-activated =
12...14 =
TIMED FUNC
1002 EXT2 COMMANDS
Defines external control location 2 (
• See parameter 1001
1003 DIRECTION
Defines the control of motor rotation direction.
1 = – Rotation is fixed in the forward direction.
FORWARD
2 = – Rotation is fixed in the reverse direction.
REVERSE
3 = – Rotation direction can be changed on command.
REQUEST
1004 JOGGING SEL
Defines the signal that activates the jogging function. Jogging uses Constant Speed 7 (parameter 1208) for speed
reference and ramp pair 2 (parameters 2205 and 2206) for accelerating and decelerating. When the jogging
activation signal is lost, the drive uses ramp stop to decelerate to zero speed, even if coast stop is used in normal
operation (parameter 2102). The jogging status can be parameterized to relay outputs (parameter 1401). The jogging
status is also seen in DCU Profile status bit 21.
0 = – Disables the jogging function.
NOT SEL
1 = 1 – Activates/de-activates jogging based on the state of
DI
jogging inactive).
2...6 = 2... 6 – Activates jogging based on the state of the selected digital input. See
DI DI
-1 = 1( ) – Activates jogging based on the state of
DI INV
active).
-2...-6 = 2( )...
DI INV DI
Parameters
). See Group 36: TIMED
STOP
2...4 – Assigns Start/Stop control to Timed Function 2...4. See
2) – the configuration of start, stop and direction commands.
EXT
1 above.
EXT COMMANDS
6( ) – Activates jogging based on the state of the selected digital input. See
INV
FUNCTIONS.
1 ( 1 activated = jogging active;
DI DI
1 ( 1 activated = jogging inactive;
DI DI
ACS550 User's Manual
; Timed
START
1 above.
TIMED FUNC
1 de-activated =
DI
1 above.
DI
1 de-activated = jogging
DI
1( ) above.
DI INV