Status Line; Operation - ABB ACS550 User Manual

ACS550 User's Manual

Status line

The top line of the LCD display shows the basic status information of the drive.
No. Field
1 Control location
2 State
3 Panel operation
mode
4 Reference value
or number of the
selected item

Operation

You operate the control panel with menus and keys. The keys include two context-
sensitive soft keys, whose current function is indicated by the text shown in the
display above each key.
You select an option, e.g. operation mode or parameter, by scrolling the
the relevant soft key. With the right soft key you usually enter a mode, accept an
option or save the changes. The left soft key is used to cancel the made changes
and return to the previous operation level.
The Assistant Control Panel has nine panel modes: Output, Parameters, Assistants,
Changed Parameters, Fault Logger, Clock Set, Parameter Backup, I/O Settings and
Fault. The operation in the first eight modes is described in this chapter. When a fault
or alarm occurs, the panel goes automatically to the Fault mode showing the fault or
alarm. You can reset it in the Output or Fault mode (see chapter Diagnostics).
LOC
1 2
Alternatives
LOC
REM
Rotating arrow
Dotted rotating arrow
Stationary arrow
Dotted stationary arrow
arrow keys until the option is highlighted (in reverse video) and then pressing
LOC MAIN MENU
49.1Hz
4 1 2
Significance
Drive control is local, that is, from the control
panel.
Drive control is remote, such as the drive I/O or
fieldbus.
Forward shaft direction
Reverse shaft direction
Drive is running at setpoint.
Drive is running but not at setpoint.
Drive is stopped.
Start command is present, but the motor is not
running, e.g. because start enable is missing.
• Name of the current mode
• Name of the list or menu shown
• Name of the operation state, e.g. PAR EDIT.
• Reference value in the Output mode
• Number of the highlighted item, e.g mode,
parameter group or fault.
1
3 4
Control panels
43
and