Siemens Sinumerik 840C Diagnostics Manual page 118

1 Alarms
1.5.1 Alarm description
110003 Data cannot be created
Scan
COPY / PASTE / OK
Effect
Data are not created
Explanation
Data type can only be created once
Remedy
Select a different data object type
110004 No data selected
Scan
In the SERVICES area with data selection
Effect
–
Explanation
The data selector is positioned on the directory .. or -
Remedy
Select with the cursor
110005 No read access for this data
Scan
DATA MANAGEMENT / COPY / COPY / DATA IN-OUT / PRINT / START
Effect
Data cannot be processed
Explanation
No authorization for reading the selected data or printing exists for the set user class
Remedy
Set a password, enable keyswitch
110006 No write access at this point
Scan
DATA MANAGEMENT / NEW / OK / COPY / PASTE
Effect
Data cannot be created/copied or written
Explanation
No authorization to write the selected data exists for the set user class
Remedy
Set a password, enable keyswitch
110007 Data must not be deleted
Scan
MANAGEMENT / DELETE / OK
Effect
Data are not deleted
Explanation
No authorization to delete the selected data exists for the set user class, i.e. they cannot be deleted at all
Remedy
Set a password, enable keyswitch
110008 Selected data cannot be edited
Scan
MANAGEMENT / EDIT
Effect
Editor is not started
Explanation
The selected data cannot be edited (e.g. a directory)
Remedy
Select alternative data
110009 No interface file
Scan
–
Effect
The interface is not parameterized and can therefore not be used.
Explanation
See above
Remedy
Select or create valid interface
1–110

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey